|
Application: EITAR Pilot Burners are use in all types of domestic gas appliances to fire the main burners and heat thermocouple's tips in thermoelectric safety systems. Pilot Burners can be fired by piezoelectric or electronic spark generators. ODS Atmospheric Analyzer is a different model that provides safety through the analysis of contamination contents in atmosphere. All Pilot Burners are designed to be used with EITAR thermocouples.
|
CONSTRUCTION CHARACTERISTICS:- Pilot body and inyector made of brass.
- Stainless steel surfaces exposed to flame.
- Several models with different options:
- Right or left hand screw brackets.
- Two or three flames top hat
- Thermocouple housing in different positions.
- ODS injector is made of a synthetic ruby stone to achive maximum reliability.
- Firing electrode ceramic support is made of Steatite whose minimum dielectric rigidity is 30 KVeff/mm.; impact resistance= 0,5 Nm.; specific resistivity= 10 exp10 to 10exp14 ohm•cm.
- Electrode alloy has high heat and corrossion resistance.
INSTALLATION DATA:- Gas inlet maximum adjusting torque= 8 Nm.
- Easy Thermocouple installation, holding it with a elastic device in a unique position.
- In ODS the thermocouple is hold with a clamp.
PERFORMANCE:- For all types of gas.
- Maximum gas inlet pressure: 50 mbar
- Injector flow to be defined by customer , within limitations specified by Argentine Standards NAG 313, 315 and 317.
|
|
|
|
|
|
|
